Eccentric cycling was first introduced in 1952,1 where 2 interlinked bicycles were used with one person pedaling forward (ie, concentric) and the other resisting the backward movements (ie, eccentric) imposed on the bicycle. Since then, researchers have been intrigued by the observation that eccentric cycling (cycle ergometry adapted to impose active muscle lengthening) can be performed at a considerably lower metabolic cost compared with traditional concentric cycling (cycle ergometry used to impose active muscle shortening).2
Chronic eccentric cycling (6–12 wk) has been demonstrated as a potent stimulus for improving locomotor muscle function in a variety of populations. These include patients with Parkinson’s disease, cancer survivors, total knee arthroplasty patients, individuals with anterior cruciate ligament injuries, elderly individuals, young healthy individuals, and athletes. The efficacy of eccentric cycling has attracted researchers to adopt eccentric cycling as a model for exercise interventions.
Although the efficacy of eccentric cycling has been proved, some potential barriers prevented the eccentric cycling becoming popular, such as limited number of commercially available eccentric cycle ergometers. To overcome such difficulty, the components used to build an eccentric cycle ergometer have been briefly described.3–5 However, these early ergometers were constructed using mostly custom parts that resulted in rather complex and costly designs.
With the advancements in technology, engineering solution based on mathematical model is making it possible to construct a modern eccentric cycle ergometer, which can be used in research, clinical, and sport training settings in a flexible and convenient manner. This study proposed 1 engineering solution based on multiple-input single-output (MISO) Wiener nonlinear model, and the solution provides a new way for the design of eccentric training system.
MISO Wiener Nonlinear Model
Structure of Eccentric Training System
The mechanical parts of the eccentric trainer including ergometer frame, electric motor, frequency drive, and industrial chain, which were similar to the mechanical parts as previously described.2 The eccentric trainer was driven by an electric motor that was controlled by a frequency drive. As the frequency drive can give different electrical signal frequency to control the speed of the electric motor, the speed of the pedal connected to the electric motor by the industrial chain can also be controlled at the set value. The high precision (Accuracy ± 0.5%) power meter UPM209 Energy Analyser (Algodue Elettronica, Fontaneto d’Agogna, Italy) was used for monitoring the whole power of the training system. The upper computer was used for collecting data and controlling the eccentric trainer automatically.
Microsoft Visual Studio VB.net (Microsoft, Redmond, WA) was applied for designing the software part. The RS485 serial port by Modbus-RTU/ASCII protocol was used for the communications among the computer, UPM209 Energy Analyser, and frequency drive.
The correlation coefficient and root mean square error between the 2 different types of value was .9985 and 3.3264, respectively, which proved the performance of the model.
The software on the eccentric trainer running in the computer was shown in Figure 3. If the real-time eccentric power value falls beyond the threshold safety value, the eccentric trainer will stop itself automatically for safety protection. The real-time power and speed at the same time were also shown, and the elapsing training time was gained from the clock timer. The eccentric training speed was set through pressing the button “SPEED UP,” “SPEED DOWN,” or being input manually. The training data were saved through pressing the button “Save Data” for the future data analysis.
The use of eccentric cycling is impeded due to the barriers, such as limited number of commercially available eccentric cycle ergometers, manufacture constraints, and substantial cost. Although previous studies described the components used to build an eccentric cycle ergometer, these ergometers were constructed using mostly custom parts that resulted in rather complex and costly designs.3–5 Electric motors have also been used to drive the backward rotations of the cranks. In addition, a modern eccentric cycle ergometer has been constructed, for which the Schoberer Rad Messtechnik (SRM) power meter (Jülich, Germany) was used to quantify the eccentric power value; however, the SRM was difficult to calibrate, which resulted in the unreliability of the collected data. Furthermore, SRM was mainly designed for cycling purpose and the SRM operation panel cannot match the eccentric study purpose.
This study proposed an alternative way for the design of eccentric training system by the application of MISO Wiener nonlinear model. To ensure the accuracy of the system, following the Equation (2), the collected whole system power P(Whole) and the estimated power P(Part1) for driving the whole trainer including the pedal without loading must be of high accuracy. In terms of P(Whole), the accuracy of the UPM209 Energy Analyser was within 0.5%; for P(Part1), the mathematical model captured 99.85% variance of the eccentric trainer power, and the accuracy of P(Part2) was within 1%.
There are 3 considerations to ensure the safety during the running of the eccentric training system. First, the safety switch is provided to the tester, and the system is functional only when the switch is pressed down by the tester. Second, the safety warning line can be set by the tester such as the red line (stable one at the higher area) in Figure 3, and if the training power exceeds the safety warning line, the eccentric training system will stop itself automatically and generates the warning signal to draw the attention of tester. Third, the emergency stop button is set in front of the tester, and the whole eccentric training system will stop immediately if the button is pressed.
In addition, the proposed method in this study allows reversing the mounting of the entire system so that the thread would prevent loosening. The issue of loosing is 1 common problem during the application of power meters because the threading on the bottom bracket and the pedals is only oriented to prevent loosening during concentric cycling, not during eccentric cycling.
In summary, the proposed method for the design of eccentric training system using MISO Wiener model provides an alternative way for the eccentric research and training. Due to the shortcomings of the current commercial eccentric cycle ergometers, this study will stimulate the application of the eccentric cycling as an exercise modality.
Abbott BC, Bigland B, Ritchie J. The physiological cost of negative work. J Physiol. 1952;117(3):380–390. PubMed ID: 14946742 doi:10.1113/jphysiol.1952.sp004755
Elmer SJ, Martin JC. Construction of an isokinetic eccentric cycle ergometer for research and training. J Appl Biomech. 2013;29(4):490–495. PubMed ID: 22923268 doi:10.1123/jab.29.4.490
Bigland-Ritchie B, Graichen H, Woods JJ. A variable-speed motorized bicycle ergometer for positive and negative work exercise. J Appl Physiol. 1973;35(5):739–740. PubMed ID: 4770358
Knuttgen HG, Patton JF, Vogel JA. An ergometer for concentric and eccentric muscular exercise. J Appl Physiol Respir Environ Exerc Physiol. 1982;53(3):784–788. PubMed ID: 7130003
Petersen FB. A bicycle ergometer for investigating the effect of eccentric exercise with arms and legs. Int Z Angew Physiol. 1969;27(2):133–137. PubMed ID: 5788675
Dempsey EJ, Westwick DT. Identification of Hammerstein models with cubic spline nonlinearities. IEEE Trans Biomed Eng. 2004;51(2):237–245. PubMed ID: 14765696 doi:10.1109/TBME.2003.820384
Voros J. Parameter identification of wiener systems with multisegment piecewise-linear nonlinearities. Syst Control Lett. 2007;56(2):99–105. doi:10.1016/j.sysconle.2006.08.001
Ding F, Shi Y, Chen TW. Gradient-based identification methods for Hammerstein nonlinear ARMAX models. Nonlinear Dynam. 2006;45(1–2):31–43. doi:10.1007/s11071-005-1850-z
Ding F, Chen TW, Iwai Z. Adaptive digital control of Hammerstein nonlinear systems with limited output sampling. Siam J Control Optim. 2007;45(6):2257–2276. doi:10.1137/05062620X
Kennedy J, Eberhart R. Particle swarm optimization. Proc IEEE Int Conf Neural Netw. 1995;4(1–6):1942–1948. doi:10.1109/ICNN.1995.488968