Browse

Développé à la seconde is a classic ballet movement that requires the maintenance of a high hip joint range of motion (ROM) and muscle strength. However, the contribution of these hip joint biomechanical parameters to this movement’s esthetic performance is unclear. Therefore, this study evaluated hip joint biomechanical characteristics of 21 experienced ballet dancers (15–29 y old) and verified the relationship between these variables with the développé à la seconde static and dynamic performance. Correlations between age, ballet practice time, gluteus maximus and gluteus medius thicknesses, ROM, and muscle strength with absolute and relative static and dynamic performances were verified. Flexors, extensors, and internal rotators peak strength and external rotation ROM were highly correlated with absolute and relative static performances (0.5–0.7). Flexors and extensors strength and external and internal rotation ROM showed the highest correlations with the développé dynamic performance (0.49–0.67). Flexor strength and flexor and internal rotation ROM predicted 26% to 41% of this movement’s static and dynamic performances. Thus, from a biomechanical perspective, clinical assessment of hip strength and ROM may be used to predict the quality of the ballet dancers’ performance of the développé à la seconde and guide classical ballet training.

This study assessed activity distribution among the hamstring muscles during the Nordic hamstring exercise (NHE). The objective was to compare muscle activity between and within muscles during the NHE to add insights in its underlying protective mechanism. Through multichannel electromyography, we measured muscle activity in male basketball players during the NHE. Electromyography was assessed at 15 locations: 5 for biceps femoris long head, 4 for semitendinosus, and 6 for semimembranosus. For each percent of the eccentric phase of the NHE, muscle activity was calculated for each electrode location within each hamstring muscle individually. To quantify whole muscle head activity, means and variances across electrodes within each muscle were calculated. Thirty-five noninjured participants were included (mean age, 18 [2] y; mass, 87 [12] kg; height, 192 [9] cm). Heterogeneous muscle activity was found between 38% and 62% and over the whole eccentric contraction phase within the semitendinosus and the semimembranosus, respectively. Muscle activity of the semitendinosus was significantly higher than that of the biceps femoris long head. During the NHE, the relative contribution of the semitendinosus is the highest among hamstring muscles. Its strong contribution may compensate for the biceps femoris long head, the most commonly injured hamstring muscle head.

This study aimed to validate a 7-sensor inertial measurement unit system against optical motion capture to estimate bilateral lower-limb kinematics. Hip, knee, and ankle sagittal plane peak angles and range of motion (ROM) were compared during bodyweight squats and countermovement jumps in 18 participants. In the bodyweight squats, left peak hip flexion (intraclass correlation coefficient [ICC] = .51), knee extension (ICC = .68) and ankle plantar flexion (ICC = .55), and hip (ICC = .63) and knee (ICC = .52) ROM had moderate agreement, and right knee ROM had good agreement (ICC = .77). Relatively higher agreement was observed in the countermovement jumps compared to the bodyweight squats, moderate to good agreement in right peak knee flexion (ICC = .73), and right (ICC = .75) and left (ICC = .83) knee ROM. Moderate agreement was observed for right ankle plantar flexion (ICC = .63) and ROM (ICC = .51). Moderate agreement (ICC > .50) was observed in all variables in the left limb except hip extension, knee flexion, and dorsiflexion. In general, there was poor agreement for peak flexion angles, and at least moderate agreement for joint ROM. Future work will aim to optimize methodologies to increase usability and confidence in data interpretation by minimizing variance in system-based differences and may also benefit from expanding planes of movement.

Left–right differential erector spinae (ES) muscle strengthening is required to correct ES muscle imbalances. The objective was to test the effect of 6 body positions on the differential activation of the ES muscles. In 14 able-bodied young women, using a surface electromyography system, the bilateral ES muscles activity at the third lumbar (ES_L3) and the 10th (ES_T10) and 6th (ES_T6) thoracic vertebral levels was measured with the contralateral arm and leg lifted in the prone and quadruped conditions and with a single arm lifted in the quadruped position. Results showed that the activity of the ES_L3 was symmetrical (P > .05) and significantly smaller than that of the thoracic ES muscles in all body positions (P < .01). The ES_T10 and ES_T6 were differentially activated in all tests (P < .001). Besides, the differential activation was higher in the contralateral-arm and -leg lift in the quadruped position than in the other positions. In conclusion, contralateral-arm and -leg lift and single-arm lift in the quadruped and prone positions are capable of differentially activating the ES muscles on one side more than the other side. Further studies are recommended to examine the effectiveness of these exercises on the correction of ES muscle imbalances in clinical populations.

Asymmetry in knee extensor moment during double-leg squatting was observed after anterior cruciate ligament reconstruction, even after the completion of the rehabilitation program for return to sports. The purpose of this study was to clarify the association between asymmetry in the knee extensor moment and pelvic rotation angle during double-leg squatting after anterior cruciate ligament reconstruction. Twenty-four participants performed double-leg squatting. Kinetics and kinematics during squatting were analyzed using a 3-dimensional motion analysis system with 2 force plates. The limb symmetry index of knee extensor moment was predicted by the pelvic rotation angle (R ² = .376, P = .001). In addition, the pelvic rotation and the limb symmetry index of the vertical ground reaction force independently explained the limb symmetry index of the knee extensor moment (R ² = .635, P < .001, β of pelvic rotation = −0.489, β of vertical ground reaction force = 0.524). Pelvic rotation toward the involved limb was associated with a smaller knee extensor moment in the involved limb than in the uninvolved limb. The assessment of pelvic rotation would be useful for partially predicting asymmetry in the knee extensor moment during double-leg squatting. Minimizing pelvic rotation may improve the asymmetry in the knee extensor moment during double-leg squatting after anterior cruciate ligament reconstruction.

Biomechanical behavior prior to landing likely contributes to anterior cruciate ligament (ACL) injuries during jump-landing tasks. This study examined prelanding knee kinematics and landing ground reaction forces (GRFs) during single-leg and double-leg landings in males and females. Participants performed landings with the dominant leg or both legs while kinematic and GRF data were collected. Single-leg landings demonstrated less time between prelanding minimal knee flexion and initial ground contact, decreased prelanding and early-landing knee flexion angles and velocities, and increased peak vertical and posterior GRFs compared with double-leg landings. Increased prelanding knee flexion velocities and knee flexion excursion correlated with decreased peak posterior GRFs during both double-leg and single-leg landings. No significant differences were observed between males and females. Prelanding knee kinematics may contribute to the increased risk of ACL injuries in single-leg landings compared with double-leg landings. Future studies are encouraged to incorporate prelanding knee mechanics to understand ACL injury mechanisms and predict future ACL injury risks. Studies of the feasibility of increasing prelanding knee flexion are needed to understand the potential role of prelanding kinematics in decreasing ACL injury risk.

This study assessed the effectiveness of a passive back support exoskeleton during a mechanical loading task. Fifteen healthy participants performed a simulated patient transfer task while wearing the Laevo (version 2.5) passive back support exoskeleton. Collected metrics encompassed L5-S1 joint moments, back and abdominal muscle activity, lower body and back kinematics, center of mass displacement, and movement smoothness. A statistical parametric mapping analysis approach was used to overcome limitations from discretization of continuous data. The exoskeleton reduced L5-S1 joint moments during trunk flexion, but wearing the device restricted L5-S1 joint flexion when flexing the trunk as well as hip and knee extension, preventing participants from standing fully upright. Moreover, wearing the device limited center of mass motion in the caudal direction and increased its motion in the anterior direction. Therefore, wearing the exoskeleton partly reduced lower back moments during the lowering phase of the patient transfer task, but there were some undesired effects such as altered joint kinematics and center of mass displacement. Statistical parametric mapping analysis was useful in determining the benefits and hindrances produced by wearing the exoskeleton while performing the simulated patient transfer task and should be utilized in further studies to inform design and appropriate usage.

Research indicates that increasing trunk flexion may optimize patellofemoral joint loading. However, this postural change could cause an excessive Achilles tendon force (ATF) and injury risk during movement. This study aimed to examine the effects of increasing trunk flexion during stair ascent on ATF, ankle biomechanics, and vertical ground reaction force in females. Twenty asymptomatic females (age: 23.4 [2.5] y; height: 1.6 [0.8] m; mass: 63.0 [12.2] kg) ascended stairs using their self-selected and flexed trunk postures. Compared with the self-selected trunk condition, decreases were observed for peak ATF (mean differences [MD] = 0.14 N/kg; 95% confidence interval [CI], 0.06 to 0.23; Cohen d = −1.2; P = .003), average rate of ATF development (MD = 0.25 N/kg/s; 95% CI, 0.07 to 0.43; Cohen d = −0.9; P = .010), ankle plantar flexion moment (MD = 0.08 N·m/kg; 95% CI, 0.03 to 0.13; Cohen d = −1.1; P = .005), and vertical ground reaction force (MD = 38.6 N/kg; 95% CI, 20.3 to 56.90; Cohen d = −1.8; P < .001). Increasing trunk flexion did not increase ATF. Instead, this postural change was associated with a decreased ATF rate and magnitude and may benefit individuals with painful Achilles tendinopathy.

The purpose of this study was to investigate the effects of foot positioning and lean mass on jumping and landing mechanics in collegiate dancers. Thirteen dancers performed 3 unilateral and bilateral vertical jumps with feet in neutral and turnout positions. Dual-energy x-ray absorptiometry scans, jump height, vertical stiffness, and joint stiffness were assessed for relationships between foot positions. Jump heights were greater in right compared with left limb (P = .029) and neutral compared with turnout (P = .020) during unilateral jumping. In unilateral landing, knee stiffness was greater in turnout compared with neutral (P = .004) during the loading phase. Jump height (P < .001) was significantly increased, and vertical stiffness (P = .003) was significantly decreased during bilateral jumping in neutral compared with turnout. Significantly increased hip stiffness during the attenuation phase was observed in neutral compared with turnout (P = .006). Left-limb lean mass was significantly less than the right limb (P < .05). Adjustments for bilateral jumping were focused on hip stiffness, whereas there was a slight shift to knee strategy for unilateral jump.