Browse

You are looking at 1 - 10 of 2,435 items for :

  • International Journal of Sports Physiology and Performance x
  • Refine by Access: All Content x
Clear All
Restricted access

Multi-Ingredient Preworkout Supplementation Compared With Caffeine and a Placebo Does Not Improve Repetitions to Failure in Resistance-Trained Women

Mariah Snyder, Christi Brewer, and Katrina Taylor

There has been an increase in the use of commercially available multi-ingredient preworkout supplements (MIPS); however, there are inconsistencies regarding the efficacy of MIPS in resistance-trained women. Purpose: To determine the effect of varying doses of MIPS compared with caffeine only (C) and a placebo (PL) on resistance-training performance in trained women. Methods: Ten women (21.5 [2.3] y) completed 1-repetition-maximum tests at baseline for leg press and bench press. A within-group, double-blind, and randomized design was used to assign supplement drinks (ie, PL, C, MIPS half scoop [MIPS-H], and MIPS full scoop [MIPS-F]). Repetitions to failure were assessed at 75% and 80% to 85% of 1-repetition maximum for bench and leg press, respectively. Total performance volume was calculated as load × sets × repetitions for each session. Data were analyzed using a 1-way repeated-measures analysis of variance and reported as means and SDs. Results: There were no differences in repetitions to failure for bench press (PL: 14.4 [3.2] repetitions, C: 14.4 [2.9] repetitions, MIPS-H: 14.2 [2.6] repetitions, MIPS-F: 15.1 [3.1] repetitions; P = .54) or leg press (PL: 13.9 [7.8] repetitions, C: 10.8 [5.9] repetitions, MIPS-H: 13.1 [7.1] repetitions, MIPS-F: 12.4 [10.7] repetitions; P = .44). Furthermore, there were no differences in total performance volume across supplements for bench press (PL: 911.2 [212.8] kg, C: 910.7 [205.5] kg, MIPS-H: 913.6 [249.3] kg, MIPS-F: 951.6 [289.6] kg; P = .39) or leg press (PL: 4318.4 [1633.6] kg, C: 3730.0 [1032.5] kg, MIPS-H: 4223.0 [1630.0] kg, MIPS-F: 4085.5 [2098.3] kg; P = .34). Conclusions: Overall, our findings suggest that caffeine and MIPS do not provide ergogenic benefits for resistance-trained women in delaying muscular failure.

Free access

Sport Science, Geopolitics, and How Each of Us Can Make a Difference

Jos J. de Koning, Carl Foster, David B. Pyne, Ralph Beneke, and Øyvind Sandbakk

Restricted access

The Relationship of Open- and Closed-Kinetic-Chain Rate of Force Development With Jump Performance Following Anterior Cruciate Ligament Reconstruction

Megan C. Graham, Kelsey A. Reeves, Tereza Janatova, and Brian Noehren

Purpose: To determine between-limbs differences in isometric rate of force development (RFD) measured during open- (OKC) and closed-kinetic-chain (CKC) strength testing and establish which method had the strongest relationship to single-leg vertical-jump performance and knee mechanics after anterior cruciate ligament (ACL) reconstruction. Methods: Subjects (n = 19) 1 to 5 years from ACL reconstruction performed isometric knee extensions (OKC), unilateral isometric midthigh pulls (CKC), and single-leg vertical jumps on the ACL-involved and -noninvolved limbs. Between-limbs differences were assessed using paired t tests, and the relationship between RFD, jump performance, and knee mechanics was assessed using correlation coefficients (r; P ≤ .05). Results: There were significant between-limbs differences in OKC RFD (P = .008, d = −0.69) but not CKC RFD. OKC RFD in the ACL-involved limb had a strong association with jump height (r = .64, P = .003), knee-joint power (r = .72, P < .001), and peak knee-flexion angle (r = .72, P = .001). CKC RFD in the ACL-involved limb had a strong association with jump height (r = .65, P = .004) and knee-joint power (r = .67, P = .002) but not peak knee-flexion angle (r = .40, P = .09). Conclusions: While both OKC and CKC RFD were strongly related to jump performance and knee-joint power, OKC RFD was able to detect between-limbs RFD asymmetries and was strongly related to knee-joint kinematics. These findings indicate that isometric knee extension may be optimal for assessing RFD after ACL reconstruction.

Free access

Erratum. Absence of Monotony and Strain Effects on Referees’ Physical Performance During International Basketball Federation World Cup Basketball Competition

International Journal of Sports Physiology and Performance

Restricted access

Is the 5-Minute Time-Trial Cycling Test a Valid Predictor of Maximal Oxygen Uptake? An External Cross-Validation Study

Fernando Klitzke Borszcz, Artur Ferreira Tramontin, Ricardo Dantas de Lucas, and Vitor Pereira Costa

Purpose: This study aimed to cross-validate a recently proposed equation for the prediction of maximal oxygen uptake ( V ˙ O 2 max ) in cycling exercise by using the average power output normalized by the body mass from a 5-minute time trial (RPO5-min) as the independent variable. Further, the study aimed to update the predictive equation using Bayesian informative prior distributions and meta-analysis. Methods: On different days, 49 male cyclists performed an incremental graded exercise test until exhaustion and a 5-minute time trial on a stationary cycle ergometer. We compared the actual V ˙ O 2 max with the predicted value obtained from the RPO5-min, using a modified Bayesian Bland–Altman agreement analysis. In addition, this study updated the data on the linear regression between V ˙ O 2 max and RPO5-min, by incorporating information from a previous study as a Bayesian informative prior distribution or via meta-analysis. Results: On average, the predicted V ˙ O 2 max using RPO5-min underestimated the actual V ˙ O 2 max by −6.6 mL·kg–1·min–1 (95% credible interval, −8.6 to −4.7 mL·kg–1·min–1). The lower and upper 95% limits of agreement were −17.2 (−22.7 to −12.3) and 3.8 (−1.0 to 9.5) mL·kg–1·min–1, respectively. When the current study’s data were analyzed using the previously published data as a Bayesian informative prior distribution, the accuracy of predicting sample means was found to be better when compared with the data combined via meta-analyses. Conclusions: The proposed equation presented systematic bias in our sample, in which the prediction underestimated the actual V ˙ O 2 max . We provide an updated equation using the previous one as the prior distribution, which could be generalized to a greater audience of cyclists.

Restricted access

Effect of Level of Competition and Drill Typology on Internal and External Load in Male Volleyball Players During the Preseason Period

Gilbertas Kerpe, Aurelijus Kazys Zuoza, and Daniele Conte

Purpose: This study aimed at evaluating the effect of level of competition and drill typology on loads during the preseason period in male volleyball players. Methods: Internal (percentage of peak heart rate [HR] and summated HR zone) and external (PlayerLoad per minute, total and high accelerations per minute [tACCmin and hACCmin], decelerations per minute [tDECmin and hDECmin], and jumps per minute [tJUMPmin and hJUMPmin]) loads were monitored across a 5-week preseason period in 12 Division 1 (age: 22.5 [3.9] y; stature: 188 [6.2] cm; body mass: 85 [11.6] kg; training experience: 9.4 [4.2] y) and 12 Division 2 (age: 20.7 [2.9] y; stature: 186 [6.2] cm; body mass: 77.8 [9.6] kg; training experience: 5.6 [2.3] y) male volleyball players. Furthermore, differences in load were assessed for each drill typology (warm-up, conditioning, technical, tactical, and integral). Results: No effects (P > .05) of level of competition on the internal (except for summated HR zone, P = .05) and external loads (except for tJUMPmin, P = .002) were found. Differently, drill typologies showed an effect (P < .001) on all the investigated internal- and external-load measures. The main post hoc results revealed higher (P < .05) percentage of peak HR, summated HR zone, PlayerLoad per minute, and tACCmin in warm-up and conditioning drills, while higher (P < .05) hDECmin and hJUMPmin were found in tactical and integral drills. Conclusions: These results suggest that volleyball coaches use warm-up and conditioning drills when aiming at increasing the internal loads, PlayerLoad per minute, and tACCmin, while tactical and integral drills should be preferred to enhance the number of hDECmin and hJUMPmin.

Restricted access

Greater Psychophysiological Intensities in Conditioned Games May Impair Technical Performance: An Exploratory Study in Youth Male Soccer Players

Filipe Manuel Clemente

Purpose: The aim of this study was 2-fold: (1) to examine the relationships between psychophysiological responses and locomotor demands with variations in technical performance during 2v2 and 4v4 conditioned games and (2) to compare psychophysiological and locomotor responses among players exhibiting higher and lower technical performance levels during the conditioned games. Methods : Twenty-four male youth soccer players (16.3 ± 0.8 y old) participating at the trained/developmental level underwent monitoring for psychophysiological responses (including heart rate, rating of perceived exertion, and visual analog scale), locomotor demands (such as distance covered), and technical performance variables (including successful and unsuccessful passes and shots, as well as lost balls) across 2v2 and 4v4 formats. These formats were applied 4 times within a single session and were replicated twice over 2 weeks. Results: Large correlations between the number of lost balls per minute and mean heart rate were found in both the 2v2 and 4v4 games (r = .586 and r = .665, respectively). Successful shots were inversely and largely correlated with mean heart rate (r = −.518) in 4v4 games. The number of interceptions per minute was inversely and significantly correlated with the visual analog scale in 2v2 and 4v4 games (r = −.455 and r = −.710, respectively). The frequency of lost balls was significantly higher among players who attained a higher mean heart rate (2v2: +42.9%, P = .031, d = −0.965; 4v4: +57.1%, P < .001, d = −2.072). Conclusions: Coaches should be aware that highly psychophysiologically demanding scenarios may significantly impair technical performance. Therefore, prioritizing technical performance by deliberately adjusting the intensity should be considered.

Restricted access

Volume 19 (2024): Issue 4 (Apr 2024)

Restricted access

The Influence of High-Intensity Work on the Record Power Profile of Under-23, Pro Team, and World Tour Cyclists

Peter Leo, Manuel Mateo-March, Andrea Giorgi, Xabier Muriel, Alejandro Javaloyes, David Barranco-Gil, Jesús G. Pallarés, Alejandro Lucia, Iñigo Mujika, and Pedro L. Valenzuela

Background: Durability (ie, the ability to attenuate the decline in performance after accumulated work) has been identified as a performance determinant in elite cyclists. The aim of the present study was to compare durability in elite cyclists of various performance levels, particularly after high-intensity work, referred to as “high-intensity durability.” Methods: Forty-nine (N = 49) male road cyclists were categorized as either under 23 years of age (U23) (N = 11), Pro Team (N = 13), or World Tour (N = 24). The participants’ critical power (CP) was assessed during the preseason. Thereafter, the participants’ maximum mean power (MMP) values were determined for efforts of different durations (from 5 s to 30 min) after different levels of accumulated work above CP (from 0 to 7.5 kJ·kg−1). Results: U23 cyclists showed a significant reduction of all relative MMP values for durations ≥1 minute after ≥5 kJ·kg−1 above CP compared with the “fresh” state (0 kJ·kg−1), whereas in Pro Team and World Tour cyclists, a significant reduction was not observed until 7.5 kJ·kg−1 above CP. In the “fresh” state, both Pro Team and particularly World Tour cyclists attained higher MMP values for efforts ≥10 minutes than U23 riders. However, more differences emerged with greater previous work levels, and indeed after 7.5 kJ·kg−1 above CP World Tour cyclists attained higher MMP values than both U23 and Pro Team cyclists for most efforts (≥30 s). Conclusion: Pro Team and particularly World Tour cyclists tolerate greater levels of accumulated work at high intensity, which might support the importance of high-intensity durability for performance.

Restricted access

Cadence Paradox in Cycling—Part 1: Maximal Lactate Steady State and Carbohydrate Utilization Dependent on Cycling Cadence

Ralph Beneke, Marisa Granseyer, and Renate M. Leithäuser

Purpose: To assess (1) whether and how a higher maximal lactate steady state (MLSS) at higher cycling cadence (RPM) comes along with higher absolute and/or fractional carbohydrate combustion (CHOMLSS), respectively, and (2) whether there is an interrelation between potential RPM-dependent MLSS effects and the maximally achievable RPM (RPMMAX). Methods: Twelve healthy males performed incremental load tests to determine peak power, peak oxygen uptake, and 30-minute MLSS tests at 50 and 100 per minute, respectively, to assess RPM-dependent MLSS, corresponding power output, CHOMLSS responses, and 6-second sprints to measure RPMMAX. Results: Peak power, peak carbon dioxide production, and power output at MLSS were lower (P = .000, ω2 = 0.922; P = .044, ω2 > 0.275; and P = .016, ω2 = 0.373) at 100 per minute than at 50 per minute. With 6.0 (1.5) versus 3.8 (1.2) mmol·L−1, MLSS was higher (P = .000, ω2 = 0.771) at 100 per minute than at 50 per minute. No corresponding RPM-dependent differences were found in oxygen uptake at MLSS, carbon dioxide production at MLSS, respiratory exchange ratio at MLSS, CHOMLSS, or fraction of oxygen uptake used for CHO at MLSS, respectively. There was no correlation between the RPM-dependent difference in MLSS and RPMMAX. Conclusions: The present study extends the previous finding of a consistently higher MLSS at higher RPM by indicating (1) that at fully established MLSS conditions, respiration and CHOMLSS management do not differ significantly between 100 per minute and 50 per minute, and (2) that linear correlation models did not identify linear interdependencies between RPM-dependent MLSS conditions and RPMMAX.