The present study aimed at examining the effect of mental calculation and number comparison on motor performance measured as the movement time of a fast manual-pointing movement. Three experiments, involving a total number of 65 undergraduate subjects, examined the effect of mental subtraction (complex) and, respectively, of (a) mental addition (simple or complex), (b) mental multiplication (simple or complex), and (c) the comparison of dot sets and number comparison. Each number was written in Arabic. The movement times were analyzed by using a multilevel linear mixed-effect model. The results showed significant improvement of manual-pointing movement performance only after the complex calculations and after number comparison. Possible implication of attentional mechanisms specific to this arithmetical activity is further discussed.
Joy Khayat, Stéphane Champely, Ahmad Diab, Ahmad Rifai Sarraj, and Patrick Fargier
Geovani Messias da Silva and Maria Eduarda Crescencio Bezerra
External focus is a way to guide human movement based on outcome rather than execution, therefore all instructions are provided based on factors present in the environment. The aim of this review is to search information about the effects of external focus in the long jump task and to compare its outcomes with other learning methods. For the research, online database search engines such as PubMed, ScienceDirect, Embase, Cinahl, and Scopus were used from January 2010 to June 2020. About 41 articles were identified by searching the online databases, 12 were discarded because they were duplicates, 11 were excluded due to the content of the abstract, and finally, 5 were excluded after evaluating the content of the full text, leaving 13 articles to be included in this review. This review sought to summarize the findings in the literature on the use of external focus in the practice of long jump. The authors concluded that the external focus is a relevant approach and can be used as a tool for the learning process.
Xiangyu Liu, Meiyu Zhou, Chenyun Dai, Wei Chen, and Xinming Ye
Surface electromyogram-based finger motion classification has shown its potential for prosthetic control. However, most current finger motion classification models are subject-specific, requiring calibration when applied to new subjects. Generalized subject-nonspecific models are essential for real-world applications. In this study, the authors developed a subject-nonspecific model based on motor unit (MU) voting. A high-density surface electromyogram was first decomposed into individual MUs. The features extracted from each MU were then fed into a random forest classifier to obtain the finger label (primary prediction). The final prediction was selected by voting for all primary predictions provided by the decomposed MUs. Experiments conducted on 14 subjects demonstrated that our method significantly outperformed traditional methods in the context of subject-nonspecific finger motion classification models.
Michele Verdonck, Jacquie Ripat, Peita-Maree Clark, Florin Oprescu, Marion Gray, Lisa Chaffey, and Bridie Kean
Wheelchair basketball (WCBB) often includes reverse integration (RI), defined as the inclusion of athletes without impairment in a sport traditionally aimed at athletes with an impairment. This study explored how RI in WCBB was understood by internal stakeholders. Data were gathered from athletes, coaches, and administrators at an Australian club competition and at a Canadian elite training center. Analysis of semistructured interviews with 29 participants led to the identification of eight themes. Collectively, the findings showed that RI was embedded within WCBB, RI was considered to be a way to advance the growth and improve the quality of WCBB as well as a way to increase awareness of WCBB and disability. There were some concerns that RI may not be equitable, as WCBB is a “disability sport.” Stakeholders’ perspectives on RI could provide useful information for sport policymakers, managers, administrators, sports organizations, and athletes interested in further developing WCBB.
Daichi Tomita, Tadashi Suga, Hiromasa Ueno, Yuto Miyake, Takahiro Tanaka, Masafumi Terada, Mitsuo Otsuka, Akinori Nagano, and Tadao Isaka
This study examined the relationship between Achilles tendon (AT) length and 100-m sprint time in sprinters. The AT lengths at 3 different portions of the triceps surae muscle in 48 well-trained sprinters were measured using magnetic resonance imaging. The 3 AT lengths were calculated as the distance from the calcaneal tuberosity to the muscle–tendon junction of the soleus, gastrocnemius medialis, and gastrocnemius lateralis, respectively. The absolute 3 AT lengths did not correlate significantly with personal best 100-m sprint time (r = −.023 to .064, all Ps > .05). Furthermore, to minimize the differences in the leg length among participants, the 3 AT lengths were normalized to the shank length, and the relative 3 AT lengths did not correlate significantly with personal best 100-m sprint time (r = .023 to .102, all Ps > .05). Additionally, no significant correlations were observed between the absolute and relative (normalized to body mass) cross-sectional areas of the AT and personal best 100-m sprint time (r = .012 and .084, respectively, both Ps > .05). These findings suggest that the AT morphological variables, including the length, may not be related to superior 100-m sprint time in sprinters.
Aliaa M. Elabd, Salah-Eldin B. Rasslan, Haytham M Elhafez, Omar M. Elabd, Mohamed A. Behiry, and Ahmed I. Elerian
Although current lumbar stabilization exercises are beneficial for chronic mechanical low back pain, further research is recommended focusing on global spinal alignment normalization. This randomized, controlled, blinded trial was conducted to determine the effects of adding cervical posture correction to lumber stabilization on chronic mechanical low back pain. Fifty adult patients (24 males) with chronic mechanical low back pain and forward head posture received 12 weeks treatment of either both programs (group A) or lumbar stabilization (group B). The primary outcome was back pain. The secondary outcomes included the craniovertebral angle, Oswestry Disability Index, C7-S1 sagittal vertical axis, and sagittal intervertebral movements. The multivariate analysis of variance indicated a significant group-by-time interaction (P = .001, partial η 2 = .609). Pain, disability, C7-S1 sagittal vertical axis, and l2-l3 intervertebral rotation were reduced in group A more than B (P = .008, .001, .025, and .001). Craniovertebral angle was increased in A when compared to B (P = .001). However, there were no significant group-by-time interactions for other intervertebral movements. Within-group comparisons were significant for all outcomes except for craniovertebral angle within patients in the control group. Adding cervical posture correction with lumber stabilization for management of chronic low back pain seemed to have better effects than the application of a stabilization program only.
Justine J. Reel
Corey A. Pew, Sarah A. Roelker, Glenn K. Klute, and Richard R. Neptune
The coupling between the residual limb and the lower-limb prosthesis is not rigid. As a result, external loading produces movement between the prosthesis and residual limb that can lead to undesirable soft-tissue shear stresses. As these stresses are difficult to measure, limb loading is commonly used as a surrogate. However, the relationship between limb loading and the displacements responsible for those stresses remains unknown. To better understand the limb motion within the socket, an inverse kinematic analysis was performed to estimate the motion between the socket and tibia for 10 individuals with a transtibial amputation performing walking and turning activities at 3 different speeds. The authors estimated the rotational stiffness of the limb-socket body to quantify the limb properties when coupled with the socket and highlight how this approach could help inform prosthetic prescriptions. Results showed that peak transverse displacement had a significant, linear relationship with peak transverse loading. Stiffness of the limb-socket body varied significantly between individuals, activities (walking and turning), and speeds. These results suggest that transverse limb loading can serve as a surrogate for residual-limb shear stress and that the setup of a prosthesis could be individually tailored using standard motion capture and inverse kinematic analyses.
Brian T. Tomblin, N. Stewart Pritchard, Tanner M. Filben, Logan E. Miller, Christopher M. Miles, Jillian E. Urban, and Joel D. Stitzel
The objective of this research was to characterize head impacts with a validated mouthpiece sensor in competitive youth female soccer players during a single season with a validated mouthpiece sensor. Participants included 14 youth female soccer athletes across 2 club-level teams at different age levels (team 1, ages 12–13 y; team 2, ages 14–15 y). Head impact and time-synchronized video data were collected for 66 practices and games. Video data were reviewed to characterize the type and frequency of contact experienced by each athlete. A total of 2216 contact scenarios were observed; heading the ball (n = 681, 30.7%) was most common. Other observed contact scenarios included collisions, dives, falls, and unintentional ball contact. Team 1 experienced a higher rate of headers per player per hour of play than team 2, while team 2 experienced a higher rate of collisions and dives. A total of 935 video-verified contact scenarios were concurrent with recorded head kinematics. While headers resulted in a maximum linear acceleration of 56.1g, the less frequent head-to-head collisions (n = 6) resulted in a maximum of 113.5g. The results of this study improve the understanding of head impact exposure in youth female soccer players and inform head impact exposure reduction in youth soccer.